(15…50t)
Acc. 74901
(60t)
Acc. 74905
(100…200t)
Acc. 74904
(400t)
Acc. 74911
(600t)
Acc. 74912
(15…60t)
Acc. 74903
(15…60t)
Acc. 74902
Acc. 74907 (15…50t)
Acc. 74908 (60t)
Acc. 74909 (100…200t)
Acc. 74910 (400t)
Acc. 74914 (600t)
Base plate
Acc. 75903
Self-aligning pivoting support
Acc. 75905
Steel alloy zinc-plated
Acc. 75906
Stainless steel
Acc. 75906i
Allows the connectivity of up to 4 or 8 analog load cells to the weighing indicator.
| Ref. 89053 |
|---|
| Junction box up to 4 load cells hermetic plastic |
| Ref. 89128 |
| Junction box up to 4 load cells over voltage protected- hermetic aluminium |
| Ref. 89093 |
| Junction box up to 4 load cells hermetic aluminium in ATEX version |
| Ref. 89002 |
| Junction box up to 8 load cells hermetic plastic |
| Ref. 89068 |
| Junction box up to 8 load cells over voltage protected- hermetic aluminium |
| Ref. 89092 |
| Junction box up to 8 load cells hermetic aluminium in ATEX version |
| Ref. 89069 |
|---|
| Junction circuit board up to 4 load cells |
| Ref. 89129 |
| Junction circuit board up to 4 load cells protected |
| Ref. 89070 |
| Junction circuit board up to 8 load cells |
| Ref. 89071 |
| Junction circuit board up to 8 load cells protected |
Extension cable with 6 wires (senses), keeping same color code than the load cells.
PVC, shielded, 6 wires 0.25 mm2, diameter 6 mm.
8900920 m coil
89010100 m coil
600 ml two-part encapsulation isolator to fill the junction box, protecting from ingress and condensing water.
Digital Load Cell Accessories:
Ref. 89090: Digital Junctions Box for 8 Load Cells. Aluminum hermetic with over voltage protection
Ref. 89091: RS-232/RS-485 Converter (picture)
Ref. 89100: 200m Digital Load Cell cable. 2x1mm 2 Power Supply / 4×0.22mm 2 Digital Signal
Ref. 89144
Z-KEY is an adapter that allows to easily communicate RS-232 / RS-485 serial devices to an Ethernet network and gives solution to Bridge and Gateway communication for ModBus TCP-IP – Modbus RTU.
Allows configuration through USB or through Webserver.
Ethernet adapter for SWIFT, MATRIX II, SMART, DP 100 and DAT.
Power Supply11..40V DC, 19..28V AC (50-60Hz)
Consumption1.5W (24V DC), 2W (24V AC)
Operating Temperature-10ºC.. + 50ºC
Storage Temperature-20ºC.. + 85ºC
Protection degreeIP20
Installation35 mm DIN Rail
ConnectionsRemovable terminal block
Dimentions17.5x100x112mm
Serial PortRS-232 / RS-485 (switchable)
Ethernet PortFast Ethernet 10/100 Mbit/s with RJ45 connector
USB PortMicro USB (only for device configuration)
Ref. 89289
The 3 metres T-Shape rubber profiles are used in pit-type truck scales to prevent sand, dirt, snow, etc. from entering the pit. Easy to install. Reduces maintenance costs.
Extension cable with 6 wires (senses), keeping same color code than the load cells.
Coated with stainless steel mesh for rodent protection and exterior transparent jacket. Additional protection to abrasion and EMI/RFI interferences.
Internal: Black PVC, shielded, 6 wires 0.25 mm2, diameter 6 mm.
External: Transparent PVC, armored stainless steel, diameter 9 mm.
8913420 m coil
8913550 m coil
89136100 m coil
89143200 m coil
Ref. 89319
This module is a conversion unit that directly connects the logical inputs and outputs of the Smart indicator and provides the user with 4 contact inputs and 4 relay outputs as well as the necessary power supply.
POWER
Input voltage230 V AC 50/60 Hz
Fuse250 V, 100 mA
Consumption2.4 W
OPERATING CONDITIONS
Operating temperature range-25ºC…+50ºC
Storage temperature limits-25ºC…+70ºC
INPUTS AND OUTPUTS
Inputs: Maximum voltage24 V DC
Relay outputs230 V AC / 0,2 A
30 V DC / 1A
MECHANICAL CHARACTERISTICS
Size136 x 82 x 57 mm
Weight0.2 kg
This module is an external board assembled on a DIN rail with:
This module is an external board assembled on a DIN rail with:
