Grid view List view

Showing all 10 results

Analog Junction Box

Junction Box for Analog Load Cells

Allows the connectivity of up to 4 or 8 analog load cells to the weighing indicator.

  • Available in plastic or aluminium.
  • Corner trimming potentiometers.
  • Version with surge arrestors for lightning protection.
  • Available ATEX version Zone 0-1-2 (gas) and 20-21-22 (dust).

Cajas suma

Ref. 89053
Junction box up to 4 load cells hermetic plastic
Ref. 89128
Junction box up to 4 load cells over voltage protected- hermetic aluminium
Ref. 89093
Junction box up to 4 load cells hermetic aluminium in ATEX version
Ref. 89002
Junction box up to 8 load cells hermetic plastic
Ref. 89068
Junction box up to 8 load cells over voltage protected- hermetic aluminium
Ref. 89092
Junction box up to 8 load cells hermetic aluminium in ATEX version

Junction Circuits (Circuit board & components only)

Ref. 89069
Junction circuit board up to 4 load cells
Ref. 89129
Junction circuit board up to 4 load cells protected
Ref. 89070
Junction circuit board up to 8 load cells
Ref. 89071
Junction circuit board up to 8 load cells protected

Read more

DAT

Digital/Analog Load Cell Transmitter

Digital / Analog Load Cell Transmitter Series based on last generation of A/D converters and microprocessors, obtaining a modern, compact and reliable design. It´s fully configurated and calibrated by front panel keyboard, avoids adjustment with potentiometers, reducing the difficulty of start-up, calibration and maintenance. It’s ideal for industrial installations with load cells.

Ref.
Versions

89076DAT 400
89076PDAT 400 Option Profibus
89076DDAT 400 Option Devicenet
89079DAT 500
89079PDAT 500 Option Profibus
89079DDAT 500 Option Devicenet

Specifications

  • Configuration and calibration by computer interface or via front panel keyboard
  • High resolution
  • Display 6 digit 14mm LED
  • 2 optically-isolated logic Inputs
  • 2 optically-isolated logic Outputs
  • Selectable Digital filtering
  • Auto-zero and zero-tracking functions
  • 10 point linearity compensation
  • Peak Hold function for dynamic measurement
  • Analog outputs: 0-5V DC, 0-10V DC, 0/20mA y 4/20mA selectable over the entire measuring range
  • Serial Outputs: RS-232, RS-422 or RS-485 with MODBUS RTU protocol. Option: PROFIBUS or DEVICENET (replace analog output)
  • Up to 32 addressable units can be connected point to point by using the RS-485 serial output
  • Protection RFI / EMI
  • Enclosure: ABS plastic
  • Mounting:
    • DAT 400 Din Rail
    • DAT 500 Panel
  • Accessory MOD 121: Power supply 230V AC to 24V DC, DIN Rail mount
  • Transport weight: 0.3 kg

Technical Specifications

Power requirements:
Input voltage 24V DC± 15%
Power consumption 7,5W
Isolation Class II
Category Category II
Environmental:
Operating Temperature -10 a +40 °C (+14 a +104 °F)
Storage Temperature -20 a +50 °C (-4 a +122 °F)
Relative Humidity 85% non-condensing
Display:
Type 6 – digit red LED, 7 segment of 14 mm (0,55”) high
Status LED’s 4 Red LED’s
Keyboard 4 Keys (tactile feedback)
Performance:
Excitation Voltage 5 V fixed, short circuit proof
Load Current 85 mA (six 350 Ω load cells)
Conversion Rate 50 updates/second (no filtering)
Resolution 60.000 counts
Sensitivity 0,2 µV / count
Linearity < 0,01 % of F.E.
Temperature Creep < 0,001% of F.S. / °C
A/D Converter 24 Bits
Signal Input Range -0,5mV/V to +3,5 mV/V (-3,9mV/V a +3,9 mV/V opcional)
Filter 0,1 Hz a 25 Hz selectable
Increment Size x1, x2, x5, x10, x20, x50
Decimal Point 0.0, 0.00, 0.000
Calibration Methods Computer interface or via front panel
Analog Output (Isolated):
Type 16 bit D/A conversion
Voltage 0-5 and 0-10 V DC (10 KΩ min load)
Current 0-20 and 4-20 mA (300 Ω max load)
Linearity < 0,012% of full scale
Temperature Creep < 0,001 % of F.E. / °C
Inputs & Outputs:
2 Logic Inputs Opto-isolated, 24 V DC PNP (requires ext.power supply)
2 Logic Outputs Solid-state Opto-relays, (maximum load 24 V DC/100 mA each)
Serial Output RS-232, RS-422 or RS-485
Standard Protocols ASCII, Modbus RTU according PI-Mbus-300* MODICON guide
Baud Rate 2400, 9600, 19200, 38400 y 115.200 selectable
Enclosure DAT 400 DAT 500
Overall Dimensions 106 x 90 x 58 mm (LxAxP) 96 x 48 x 139 mm (LxAxP)
Mounting DIN Rail Panel
Enclosure ABS ABS
Protection (front) IP20 IP20
Weight 280g 310g
Wiring Connections Terminal blocks (pitch = 5mm) Terminal blocks (pitch = 5mm)
Panel drill 92 x 44 mm

Read more

Digital Junction Box

Junction Box for Digital Load Cells

Allows the connectivity of up to 8 or 10 Digital Load Cells to the weighing indicator.

  • Hermetic aluminium construction.
  • Surge arrestors for lightning protection.

Cajas suma

Ref. 89090
Aluminium Junction Box up to 8 Digital Load Cells
Ref. 89153
Aluminium Junction Box up to 10 Digital Load Cells

Read more

DP 100

Weighing Indicator – Tare

Specifications

  • Friendly configuration and calibration menu.
  • High resolution: 20 bits A/D , 1 million internal divisions, 120 readings/sec.(max.)
  • Display 6 digits 25,4 mm LCD with LED backlight.
  • RS-232 serial port for PC or printer connection.
  • Load cell Exitation at 5 V DC, for up to 4 load cells 350 Ω or 8 load cells 700 Ω.
  • Adaptor: 9 V DC included.
  • Battery: 5 units of AA size.
  • Battery life:
    • 50 hours (1 load cell 350 Ω without backlight).
    • 24 hours (4 load cells 350 Ω with backlight).
  • Plastic enclosure with mounting kit.
  • Multi range: for a dual range and dual division size.
  • Animal weighing.
  • Peak value (HOLD).
  • Programmable keys (F1, F2, Enter + F2) to assign to the following functions:
    • Print
    • Units kg/lg switch
    • M+ (accumulation and print)
    • MC (memory cleaning)
    • Weight / Weight Accumulation / Times Weight Accumulation Display Switch.
    • HR (high resolution switch)
    • Input Pre-Tare value
  • Transport weight: 1.5 kg

Technical Specifications

Analog Specifications:
Load Cell Excitation 5 V DC ±5% 60 mA (Up to Four 350 Ω Load Cells)
Max. Load Cell Input Signal 3 mV/V
Input Sensitivity 0,15 µV
Conversion Rate Approximately 120 times/sec. (max.)
Resolution 20 bits
Digital Specifications:
Display LCD, 6 digits, 25.4 x 10 mm (W x H), LED backlight
Display Frequency 50 times/sec. (max.)
Display Range -999.000 ~ 999.000
Min. Division 1, 2, 5, 10, 20, 50
Decimal Point 0, 0.0, 0.00, 0.000, 0.0000
Memory Calibration parameter and function setting are all stored in EEPROM
Serial Interface: RS-232 Port
Alimentación necesaria:
Adaptor Input 230 V AC 50 ~ 60 Hz / Salida 9 V DC / 1000 mA
Optional Batteries 5 pcs. size AA general batteries
Battery Life
  • 24 hours: 110mA consumption / 4 load cells of 350 Ω with backlight
  • 50 hours: 45mA consumption / 1 load cell of 350 Ω without backlight
Other Specifications:
Operating Temperature 0 ~ 40 °C
Operating Humidity < 85% R.H. non-condensing
Dimensions (WxDxH) (mm) 193 x 49.5 x 94.4 mm (indicator housing) 225 x 60 x 134.7 mm (mounting hardware included)

Read more

LOADGUARD

Electronic Load Limiter

The LOADGUARD is an electronic load limiter with redundant weight control by reading up to two independent signal inputs, from the load cells or load pins. Its output relays act according the alarm programming, weight differences between channels or system failures. The main applications are in the control and overload protection in lifting equipments, cranes and machinery.

Ref.
Versions

89147LOADGUARD OPTO
89148LOADGUARD ANALOG OPTO

Specifications

  • In compliance to standard EN 13849-1:2008, PL-d, category 3, corresponding to Safety Integrity Level SIL 2 IEC 62061.
  • 2 weighing inputs for load cells, connected to two independent ADC and two independent microcontrollers.
  • Connection up to 4 load cells of 350 Ω per channel (8 load cells of 700 Ω per channel).
  • 4 control relays: Alarm thershold, pre-alarm thershold, maximum load difference between channels and load cell cable break detection.
  • Display 4 digit 7mm LED and 4 keys for configuration, setting and status messages.
  • Weighing functions: Weight display, full scale and division settings, zero calibration, gain calibration by mass or mV/V, auto-zero, zerotracking and programmable filters.
  • Optionally available with dual 4-20mA analogue outputs, redundant, one per weighing channel.

Technical Specifications

Load cell connection
Scale input singal range -+3.9 mV/V
Input sensitivity 0.2 microV
Resolution Internal 24 bits and external up to 10.000 divisions on the payload
Linearity error <0.01% measuring range
Thermal stability <0.002% F.S./°C
Resolution Category II
Load cell excitation voltage 87 Ω (4 load cells of 350 Ω, 8 load cells of 700 Ω, per channel)
Outputs:
Logical outputs 4 relay (max 48V DC/AC)
Analogue output (Optional) 2 outputs 4-20mA (1 per channel) of 16 bits of resolution
Power, working condition and mechanical data:
Power supply 10V to 30V DC
Maximum consumption 6W
Temperature range -20 °C to +50 °C de operating; -20 °C to +60 °C storage
Mounting DIN rail, IP20
Operator interface Display: 4 LED digit 7mm; Keyboard: 4 keys

Read more
Weighing Electronics-MATRIX II

MATRIX II

Alphanumeric Weighing Indicator with Graphic Display

Ref.
Versions

89400MATRIX II for analog load cells
89400DMATRIX II DIGITAL for digital load cells

Specifications

  • Alphanumeric Weighing Indicator with graphic monochrome display 240×128 pixels.
  • OIML R76 & EN 45501 Approved, monorange or multirange.
  • Calibration and configuration by keyboard and/or remote by communication port.
  • Single Scale Connection for analog load cells (Ref.89400) or digital load cells (Ref.89400D) enlarged to Double Scale Connection by additional interface boards.
  • Time & Date.
  • Several connectivity possibilities:
    • Two RS-232 ports: Bidirectional for PC communications, printer or remote display.
    • One RS-485 port: Network communications up to 1200m. Additionally, it’s possible to be connected with external dispositives of digital I/O, analog outputs, relay boards, etc.
    • One additional free port: to extend the indicator to several fieldbuses.
  • Integrated front panel alphanumeric keyboard and connector for an external standard PC keybard (PS/2).
  • Universal power supply: 90-260 V AC – 50/60 Hz.
  • Stainless steel enclosure. Desktop or Panel mounting. IP40 Protection. Optional: Wall mounting kit.
  • Multirange: Allows two working ranges for two division sizes.
  • Configurable Ticket.
  • Linearity correction.
  • Metrological sealing for easy maintenance: Software sealing by internal calibration counter, or mechanical sealing for blocking calibration switch.
  • Microprocessor of 32 bits, with Flash memory that allows the software update through a serial port for loading new applications.
  • Selectable applications: Weighbridge, industrial, dosing.

Additional Specifications

Ref. 89400: MATRIX II indicator for analog load cells:

In addition of general characteristics, the MATRIX II version has:

  • A/D 24 bits, 16 millions internal div.; 100.000 external divisions; 50 reading/sec. Power up to 8 load cells (350 Ω) or up to 16 load cells (700 Ω), at 6 V DC excitation. 6000 div. at 0,6 µV/div.
  • Minivolt pre-calibration: Allows start-up without mass calibration by entering the load cell nominal capacity and nominal sensitivity mV/V.

Ref. 89400D: MATRIX II DIGITAL indicator for digital load cells:

In addition of general characteristics, the MATRIX II DIGITAL version has:

  • Power up to 16 digital load cells. Distance between the indicator and the scale up to 1200m.
  • Digital pre-calibration: Allows start-up without mass calibration thanks to the pre-calibration of digital load cells. Automatic or manual corner adjustment. Individual load cell diagnostic.

 

Applications

Weighbridge: Software for management of vehicle entrance and exit in plants, with first and second weighing control and database that manages and stores all the information (registration number, products, customers/suppliers, entrances/exits, truck pre-fixed tare values, etc.), as well as the printing of its corresponding tickets and listings. Data stored in a permanent internal battery powered RAM memory. Multilingual: English, French, German, Spanish, Portuguese and Czech.

Industrial:

  • Weight-Tare.
  • Piece counting.
  • Weight accumulation.
  • Programmable pre-fixed tares.

Dosing

 

Ref.
Optional Accessories

Ref: 89312PC KEYBOARD
Ref: 89313MATRIX-PRINTER CABLE (3 Meters)
Ref: 89314MATRIX-PC CABLE (3 Meters)
Ref: 89401AMPLIATION 2nd SCALE FOR ANALOGUE LOAD CELLS
Ref: 89402AMPLIATION 2nd SCALE FOR DIGITAL LOAD CELLS
Ref: 89404RS232 OPTO-ISOLATED EXPANSION PORT
Ref: 89405RS485 OPTO-ISOLATED EXPANSION PORT
Ref: 89406DIGITAL INPUTS / OUTPUTS MODULE
Ref: 89407ANALOG OUTPUT MODULE: 0-5V, 0-10V, 0-20mA, 4-20mA
Ref: 89409ETHERNET EXPANSION PORT

Read more

RD 60

Weighing Remote Display

Specifications

  • Remote display for SWIFT, SMART and MATRIX II weighing indicators.
  • 7 digit weight LED 57 mm and 8 status LED. High bright.
  • Stainless Steel enclosure IP65.
  • Communication RS232 and RS 485.
  • External Power supply: 230 ±10% Vac 50/60 Hz 12W.
  • Mounting hardware included.
  • Dimensions 505 x 155 x 140 mm.
  • Transport weight: 4.9 kg

 

Read more

SGA

Analog Converter for connecting Load Cells

The SGA Converter is an analog signal conditioner specific for load cells and for transducers based on strain gauges Wheatstone bridges

SGA converts the load cell output signal to different kinds of analog standard outputs used in industrial instrumentation. With DIL switches can be selected: Current output 0-20 mA or 4-20 mA; “Unipolar” voltage output 0-5V or 0-10V and “Bipolar” voltage output ±5V o ±10V

It has integrated filter with selectable cut-off frequencies from 1Hz to 5 KHz, for reducing oscillations induced by mechanical vibrations and/or electrical noise, providing stable readings under adverse conditions

Ref.
Versions

Ref. 89060SGA-A Power supply
110/230 V AC and 18/24 V DC
Ref. 89061SGA-D Power supply 18/24 V DC

Specifications

  • User-selectable analogue output: ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20 mA.
  • Power supply 4 load cells of 350 Ω or 8 load cells of 700 Ω
  • Gain adjustment for different Load Cell sensibilities by DIL switches and fine adjustment potentiometer
  • Zero adjustment up to 80% offset by DIL switches and fine adjustment potentiometer
  • Enclosure IP65 ABS case 160x80x55 mm with 3 cable glands
  • Transport weight: 0.5 kg

Read more

SMART

Weighing Indicator

The SMART is an approved Electronic Weighing Indicator valid for all types of commercial transactions. Finished in ABS or Stainless Steel housing with IP65 and ATEX options. Includes adjustable mounting bracket made of Stainless Steel. It’s available in different versions to suit the needs of each application.

Specifications

  • OIML R76 & EN 45501 approved, single or Multirange, 6000 div at 0,6 μV/div.
  • Display 7 digit 20mm LED high bright.
  • High resolution: 24 bits A/D, 16.000.000 internal divisions; 100.000 external divisions.
  • Friendly configuration and calibration menu.
  • Calibration by Masses or in mV/V, allowing the start-up without calibration masses entering the load cell capacity and sensitivity in mV/V.
  • Calibration sealing by software or mechanically
  • Power up to 4 load cells (350 Ω) or up to 8 load cells (700 Ω).
  • RS-232 serial port for PC, printer or remote display connection.
  • Mounting: bench/wall mounting kit.
  • External Power supply 230 V AC 50/60 Hz.
  • High electromangnetic interference protection using filters, ferrites and shields.
  • Multi-range: for a dual range and dual division size.
  • Standard Ticket or customized from PC.
  • Linearity correction.

Applications

  • Weight indicator for industrial scales, platform scales, pallet-scales, truck scales.
  • Scales in food, chemical and pharma industries, with hermetic stainless steel version IP65.
  • Weighing Indicator for tank and silos.
  • Piece counting and totalizations (accumulation of weights).
  • Configurable as weight indicator or as remote display of other weight indicator.
  • Animal weighing / check-weigher.

Options

  • Available in ATEX version Zone 2 (gas) and 21-22 (dust)
  • Alibi Memory DSD legal-for-trade with half million weight registers
  • 4 digital inputs
  • 4 digital outputs
  • Analogue output configurable at 0-5 V, 0-10 V, 0-20 mA, 4-20 mA
  • External power supply of 12 V DC.
  • Additional communication RS-232 and RS-485

Read more
Weighing Electronics-SWIFTWeighing Electronics-SWIFT

SWIFT

Weighing Indicator & High-Speed Transmitter

The SWIFT is a weighing indicator and high-speed transmitter that is ideal for static and dynamic applications. Its mounting versions in DIN rail or panel make it particularly suitable for weighing applications in industrial processes and machinery. Its many possibilities of data transmission, digital inputs and outputs enable easy connection to PLC, PC and remote systems, in the main standards of industrial communication.

Specifications

  • Display 6 digit 10mm LED.
  • High resolution: 24 bits ADC with 16.000.000 internal divisions and 100.000 external divisions.
  • High speed reading: 2400 measures per second.
  • Configuration and calibration by keyboard or computer.
  • Calibration by Masses or in mV/V, allowing the start-up without masses entering the load cell capacity and sensitivity in mV/V.
  • Selectable digital filters.
  • Calibration sealing by software or mechanically.
  • Power up to 8 load cells (350Ω) or up to 16 load cells (700Ω).
  • Communication RS-232 & RS-485 (Modbus RTU & ASCII) and optional Profibus or Profinet.
  • Analogue output configurable at 0-5V, 0-10V, 0-20mA & 4-20mA, with galvanic isolation.
  • 3 Digital opto-isolated inputs with status LED.
  • 3 Digital outputs to relay with status LED.
  • DIN rail or Panel mounting.
  • Power supply 10 – 28 V DC.

Applications

  • Direct transmission of weight to PC/PLC
  • Weighing and Level Measurement in Tanks & Silos
  • Filling and Dosing Machines, by weight, in charge or discharge
  • Multiple Weight Indicators in the same Bus
  • Crane overload control
  • Check-Weigher Scales
  • Animal Weighing Scales
  • Multi-head Scales
  • Test Machinery
  • High-Speed Dynamic Sorting Scales

Read more